在線留言
貨物名稱：自動反沖洗濾器橇
項目概況：渤中19-6凝析氣田試驗區開發項目（第二階段）計劃新建一座天然氣增壓回注平臺渤中19-6BOP平臺，新建的BOP平臺與已有渤中19-6WHPA平臺通過棧橋連接。
主要技術要求：
(1) 設計壓力、溫度、排量、過濾精度應至少滿足:
設計壓力： 1000kPaG
溫度：50 ℃
排量： 2500m3/h (each)
過濾精度: ＜180μm
(2) 濾器殼、封頭和內件的材質最低要求應滿足：
殼: Q345R+Lining Rubber，封頭: Q345R+Lining Rubber，內件: S31803
(3) 自動反沖洗濾器具備自動在線反沖洗功能。濾器反沖洗期間，反沖洗水量應小于5%額定流量，壓力波動小于10%進口壓力。
(4) 濾器內件為過濾柱型式，不接受刮板式機械自清洗型式。
數量：
自動反沖洗濾器橇：1套，橇內包含1臺自動反沖洗濾器，單臺排量2500m3/h；
海水粗濾器橇：1套，橇內包含1臺海水粗濾器，單臺排量2500m3/h；
交貨期：2022年7月10日（國內）或2022年6月27日（進口）
交貨地點：國內：天津塘沽海工建造場地；
國外：中國天津港（進口貨物）。
2．業績和資格要求：
（1）自動反沖洗粗濾器橇需按照《海上固定平臺安全規則》的要求進行設計、制造、認證和檢驗。投標人應委托國家安全生產監督管理總局海洋石油作業安全辦公室（COOOSO）認可的船級社（ABS，LIoyd’s，DNV，CCS，BV）對自動反沖洗粗濾器橇設備整體進行檢驗并獲得檢驗證書。
（2）投標人所投標的自動反沖洗濾器橇應為制造商（成橇商應為自動反沖洗濾器的制造商）的成熟產品，買方不接受新試制產品。該制造商應具有至少1個項目（限2010年1月1日之后簽訂的合同，相同型式的自動反沖洗濾器，排量≥2000m3/h，設計壓力≥1000kPaG）在海上平臺或FPSO運行2年及以上（從調試驗收?qǐng)?bào)告簽字日期或使用方出具的運行時間證明文件起計）的業績，并提供相應的書面材料（合同及調試驗收?qǐng)?bào)告或合同及使用方出具的有效證明文件）；上述文件中如未包含設備所在設施的名稱及使用方信息，投標人應提供有效說明文件。為核實投標人業績，在授予合同前招標人有權要求投標人進一步提供相關證明資料，包括但不限于技術協議或技術澄清紀要、圖紙和計算書等技術文件、第三方船級社出具證書、發票、銀行進賬單/流水單、進出口報關單據等。投標人無法提供相關材料的，將視為無效業績。
3．有興趣的合格投標人可通過以下方式獲取招標文件：
從2021年9月14日至2021年9月24日止，請登錄中國海洋石油集團有限公司采辦業務管理與交易系統（https://buy.cnooc.com.cn）的招標公告頁面進行購買。首次登錄必須先進行注冊（免費），注冊成功后，方可購買招標文件。購買過程必須全程在線操作，線下形式的匯款將不予接受。標書費支付成功后，投標人可自行下載招標文件。售后不退。如未在系統中領購招標文件，不可參加投標。本招標文件每套售價為2000元人民幣或300美元，售后不退。
4．投標文件遞交截止時間和地點：所有投標文件都應附有按規定提交的投標保證金并于2021年10月11日10:00時（北京時間）前遞交至北京市東城區東直門外小街6號海油大廈4層第五會議室，在此時間后收到的投標文件恕不接受。
5．開標時間：定于2021年10月11日10:00時（北京時間）開標。開標地點：北京市東城區東直門外小街6號海油大廈4層第五會議室。
6. 本次招標公告同時在機電產品招標投標電子交易平臺（www.chinabidding.com）上發布。
7. 投標人在投標前需在機電產品招標投標電子交易平臺上完成注冊。評標結果將在機電產品招標投標電子交易平臺公示。
招標人：中海石油（中國）有限公司
詳細地址：天津市濱海新區海川路2121號海洋石油大廈A座
郵 編：300459
聯系人：王喆
聯系電話：+86-22-66502503
招標代理機構：中化建國際招標有限責任公司
詳細地址：北京市東城區東直門外小街6號海油大廈4層
郵編：100027
聯系人：于娜
聯系電話：+86-10-84523443
電子郵箱：yuna5@cnooc.com.cn
Project: BZ19-6 BOP ConDENSATE GAS FIELD PILOT AREA DEVELOPMENT PROJECT
BidNo: 0704-2140JDCP1449/01
Date: SEPTEMBER 14th, 2021
1. CNCCCInternational TenderingCo., Ltd.(hereinafter called “TenderingAgent”), for andon behalf of CNOOC China Limited(hereinafter called"Purchaser") invites sealedbids fromeligiblebidders for the supply offollowing equipment:
Name of Goods: AUTO BACKWASH COARSE FILTER SKID
Main Technical requirement:
★ The design pressure, temperature, capacity, filtration precision should meet the following requirements：
Design pressure：1000kPaG
Temperature：50 ℃
Capacity：2500m3/h (each)
Filtration precision: ＜180μm
★ The minimum requirement of material of shell, heads and internals shall meet the following:
Shell: Q345R+Lining Rubber，Head: Q345R+Lining Rubber，Internals: S31803
★ The auto backwash coarse filter with automatic backwash function online. The flowrate of backwash water should be less than 5% (Flow Rate), the pressure fluctuation of seawater should be less than 10% (Intake Pressure), during backwashing.
★ The auto backwash coarse filter internals’type is filtration column, the scraper mechanical self-cleaning type is unacceptable.
Qty: Auto Backwash Coarse Filter Skid (BOP-X-4001A), 1 Set
Seawater Coarse Filter Skid(BOP-X-4002), 1 Set
Delivery Schedule:
On or before July.10th,2022 (From within P.R.CHINA);
On or before June.27th,2022 (From outside P.R.CHINA).
Destination of delivery:
Construction Site of Tanggu,TIANJIN(From within P.R.CHINA)；
Tianjin Seaport(From outside P.R.CHINA).
2. Qualification Requirement:
(1) The Auto Backwash Coarse Filter skid shall be designed, manufactured, certified and tested in accordance with the requirements of Safety Rules for Offshore Fixed Platform Issued by State Economic & Trade Commission. PRC (SETC). Supplier shall at his own cost arrange inspection and obtain inspection compliance certificate of the Auto Backwash Coarse Filter skid from one of the certifying agencies authorized by COOOSO, which are ABS, LIoyd’s, DNV,CCS, BV.
(2)The Auto Backwash Coarse Filters Skids that BIDDER supplied should be the manufacturer’s mature products, unused prototype equipment shall not be acceptable. The products(Limited to signing the contract after January 1, 2010, the same type of Auto Backwash Coarse Filter , Capacity ≥ 2000m3/h, Design Pressure ≥ 1000kPaG) provided by Manufacturer shall have at least 1 project of 2 years or more of successful performance (from the date of commissioning acceptance report or the certificate issued by the user) on the Offshore Oil Platform or FPSO. The BIDDER shall provide the relevant supporting documents (contract and commissioning acceptance report or contract and the effective certificate issued by the user). If the name of the facility and the user_EpSingleQuotes_s information are not included in the above documents, the bidder shall provide the valid documentation. In order to verify the performance of BIDDER, the Tenderee shall have the right to request the bidder to provide further relevant supporting information before the contract is awarded. Including but not limited to, technical documents such as technical agreement, technical clarification notes, drawings and calculations etc., certificate approved by the third party classification society, invoice, bank statements/slip, import and export customs declaration etc. If the BIDDER is unable to provide relevant materials, it will be regarded as invalid performance.
3. All those who are willing to participate in the bids are kindly requested to :enter into website http://buy.cnooc.com.cn to purchase the bidding documents (electronic edition) on line from September 14th, 2021 to September 24th, 2021,upon non-refundable payment of RMB2000 or USD300 for each copy. The bidding documents will not be accepted if these are not purchased online.
4.Bids must be delivered to Meeting room 5, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China for submission of bids before 10:00 a.m. (Beijing time) on October 11th, 2021.
5.Bid opening time: the bid will be opened at 10:00 a.m. on October 11th, 2021(Beijing time). Bid opening place: Meeting room 5, 4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R.
6. The Invitation for Bids is issued on the website of www.chinabidding.com simultaneously.
7. The bidder needs to register before the tender on www.chinabidding.com. And the evaluation results will be released on www.chinabidding.com.
Name of Purchaser:CNOOC CHINA LIMITED
Address: Building A, No.2121,Haichuan Road, Binhai New Area,Tianjin, P.R. China, 300459
Contact Person: Mike Wang
Telephone: +86-22-66502503
E-mail:wangzhe3@cnooc.com.cn
Name of Tendering Agent: CNCCC International TenderingCo.,Ltd.
Address:4th Floor, CNOOC Tower, No.6 Dongzhimenwai Xiaojie, Dongcheng District, Beijing,100027, P.R. China
Contact person:Ms.Yu Na
Telephone:+86-10-84524334
E-mail: yuna5@cnooc.com.cn
