點擊圖片查看原圖
玖城牌塑膠齒輪潤滑脂
產品型號:SH11301 SH11302 SH11303
產品描述:玖城牌塑膠齒輪潤滑脂采用中等粘度精純白油為基礎油，加有抗氧化、防銹蝕、抗腐蝕等多種添加劑精制而成。
產品特點:
極強的油膜形成能力，降噪音與抗磨損效果極佳。
優異的粘附性和耐高溫性，高溫下油脂不軟化、不甩出。
良好的抗水性、抗氧化性和剪切安定性，極長的使用壽命。
極低的摩擦系數和蒸發損失，與大多數塑膠和彈膠體相容。
產品應用:
用于各種不同轉速的塑膠齒輪、減速微電機、微型減速器的潤滑和消除噪音。
用于電子設備、汽車電裝(開關、后鏡、天線)、辦公設備以及精密機械的消音、減摩與潤滑。
用于電動工具、電子設備、家用電器、辦公設備、健身器材等的塑膠齒輪及零件的消音、減摩與潤滑。
使用溫度:-40℃～180℃
JC Plastic Gear Grease
Product number:SH11301 SH11302 SH11303
Product description:JC Plastic gear grease is manufactured by with Medium viscosity refined white oil for base oil , and add various additives, such as oxidation resistance, rust protection and corrosion resistance.
Performance characteristics:
Excellent oil film forming ability, excellent noise reduction and wear resistance.
Excellent adhesion and high temperature resistance, the grease does not soften and be throwed at high temperature.
Good water resistance, oxidation resistance and shear stability, and long service life.
Extremely low friction coefficient and evaporation loss are compatible with most plastics and elastomers.
Recommended use:
It is used for lubricating and eliminating noise of plastic gears, deceleration micromotors and mini reducers for various speeds.
It is used for noise reduction, friction reduction and lubrication of electronic equipment, automobile electrical appliances (switch, rear mirror, antenna), office equipment and precision machinery.
Used for power tools, electronic equipment, household appliances, office equipment, fitness equipment and other plastic gear and parts of the sound absorption, anti-friction and lubrication.
Temperature range:-40℃ to 180℃
玖城牌塑膠齒輪潤滑脂的典型數據：Typical data of JC Plastic gear grease:
|
項目Project |
典型數據Typical data |
|
外觀 Appearance |
白色均勻油膏 |
|
工作錐入度/0.1mm 60次 Penetration 1/10mm 60 times |
235--285 |
|
滴點，℃ Drop point,℃ |
380 |
|
銅片腐蝕（T2.100℃.24h） Copper corrosion（T2.100℃.24h） |
合格PASS |
|
水淋流失量（79℃，1h）% Sprinkling loss（79℃，1h）% |
1.1 |
|
鋼網分油（100℃，24h）% Steel mesh oil filtering（100℃，24h）% |
1 |
|
防腐蝕性（52℃，48h） Corrosion resistance（52℃，48h） |
合格 PASS |
|
極壓性能（四球機法）Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
560 |
|
抗磨性能（四球機法）（40kg,60min)/mm Anti-wear performance (4-ball test)（40kg,60min)/mm |
0.4 |
|
蒸發度（120℃，m/m）% Evaporativity（120℃，m/m）% |
≤1 |
|
EMCOR防銹實驗，10%合成海水 EMCOR anti-rust experiment, 10% synthetic sea water |
0.0（無銹） (No rust) |
|
適用工作溫度℃ Applicable working temperature ℃ |
-40--+180 |