點擊圖片查看原圖
玖城牌高低溫潤滑脂
產品型號:KW2101 KW2102 KW2 KW3
產品描述:玖城牌高低溫潤滑脂采用聚脲類耐高低溫苯基硅油，加有抗磨、抗氧化、防銹蝕、抗腐蝕等添加劑精制而成。
產品特點:
極佳的高低溫性能，高溫工作環境下具有優異的熱穩定性。
良好的潤滑和抗磨性能，使?jié)櫥考袠O低的摩擦系數。
優異的氧化安定性，機械安定性和膠體安定性，避免和減少潤滑脂流失和高溫變質。
良好的防潮濕、防水琳和防銹防腐性能，使?jié)櫥考趶?fù)雜工況下得到全面保護。
產品應用:
各種低溫、冷凍、冷藏、制冷設備以及低溫輸送裝置的導軌、軸承、齒輪、鏈條等潤滑。
嚴寒、酷熱或高溫差環境中工作的設備，傳動機械部件的潤滑。
高寒環境下車輛的輪轂、底盤、軸承、懸掛裝置、玻璃升降器、座椅滑道、雨刮器馬達等摩擦部位的潤滑。
使用溫度:-50℃～320℃
JC High And Low Temperature Grease
Product number:KW2101 KW2102 KW2 KW3
Product description: JC High and low temperature grease,the use of polyurea resistant to high and low temperature phenyl silicone oil,add anti-wear, anti-oxidation, anti-rust, anti-corrosion and other additives Refined.
Performance characteristics:
With excellent high and low temperature performance, excellent thermal stability in high temperature working environment.
With good lubrication and abrasion resistance, so that the lubricating parts have extremely low friction coefficient.
With excellent oxidation stability, mechanical stability and colloidal stability to avoid and reduce grease loss and high temperature deterioration.
With good anti-humidity, water-proof and anti-rust anti-corrosion properties, make lubricated parts under complex working conditions under full protection.
Recommended use:
Used for all kinds of lubrication such as guide, bearing, gear, chain and so on for cryogenic, freezing, refrigeration, refrigeration equipment and cryogenic conveyor.
Used for severe cold, extreme heat or high temperature, poor working environment, lubrication of mechanical parts.
Used for the wheel hub, chassis, bearing, suspension device, glass lift, seat slide, wiper motor and other friction parts are lubricated in high cold environment.
Temperature range:-50℃ to 320℃
玖城牌高低溫潤滑脂的典型數據：Typical data of JC High and low temperature grease:
|
項目Project |
典型數據Typical data |
|
工作錐入度/0.1mm 60次Penetration 1/10mm 60 times |
235--285 |
|
滴點，℃ Drop point,℃ |
300 |
|
銅片腐蝕（T2.100℃.24h）Copper corrosion（T2.100℃.24h） |
合格PASS |
|
水淋流失量（79℃，1h）% Sprinkling loss（79℃，1h）% |
0.9 |
|
鋼網分油（100℃，24h）% Steel mesh oil filtering（100℃，24h）% |
0.8 |
|
防腐蝕性（52℃，48h）Corrosion resistance（52℃，48h） |
合格 PASS |
|
極壓性能（四球機法）Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
400 |
|
抗磨性能（四球機法）（40kg,60min)/mm Antiwear performance (4-ball test)（40kg,60min)/mm |
0.38 |
|
蒸發度（120℃，m/m）% Evaporativity（120℃，m/m）% |
≤1 |
|
EMCOR防銹實驗，10%合成海水 EMCOR antirust experiment, 10% synthetic sea water |
0.0（無銹）(No rust) |