點擊圖片查看原圖
玖城牌防水密封潤滑脂
產品型號:SG3301 SG3302 SG3303
產品描述:玖城牌防水密封潤滑脂采用氟硅油為基礎油，聚四氟乙烯(PTFE)為稠化劑并加有抗氧化、抗腐蝕等精制而成。
產品特點:
優異的抗水性和密封性，耐冷、熱水，抗環境老化。
優良的高、低溫性能和抗氧化性能，稠度隨溫度變化小。
優良的耐油性、耐腐蝕性和耐大部化學品，使用壽命極長。
極佳的粘附性和潤滑性，與絕大多數塑料和彈性體良好相容。
產品應用:
用于塑料、橡膠、金屬之間及密封件的潤滑與密封。
用于閥門、旋塞、柱塞、襯墊、O形圈和楔型密封器的防水、密封潤滑及防腐蝕。
用于玩具、電器、儀表、衛浴器材、電子元件、電纜接頭、絕緣端子的防水、密封、絕緣及防潮。
使用溫度:-40℃～200℃
JC Waterproof Seal Grease
Product number:SG3301 SG3302 SG3303
product description:
JC Waterproof seal grease,the use of Fluorosilicone oil as base oil, polytetrafluoroethylene (PTFE) as thickening agent add the addition of antioxidants, anti-corrosion agents and other refined.
Performance characteristics:
Excellent resistance to water and sealing, cold , hot water, anti - environmental aging.
Excellent high and low temperature performance and oxidation resistance,Consistency is constant with the change of temperature.
Excellent oil resistance, corrosion resistance and resistance to most chemicals, very long service life;
Excellent adhesion and lubrication, compatible with most plastics and elastomers.
Recommended use:
It is used for lubrication and sealing between plastic, rubber, metal and seals.
Waterproof, sealed lubrication and anti-corrosion for valves, cocks, plunger, gaskets, o-rings and wedge seals;
It is used for waterproof, sealing, insulation and moisture proof of toys, electrical appliances, meters, bathroom fittings, electronic components, cable joints and insulation terminals.
Temperature range:-40℃ to 200℃
玖城牌防水密封潤滑脂的典型數據：Typical data of JC Waterproof seal grease:
|
項目Project |
典型數據Typical data |
|
外觀 Appearance |
白色光滑均勻油膏 |
|
工作錐入度/0.1mm 60次 Penetration 1/10mm 60 times |
235--285 |
|
滴點，℃ Drop point,℃ |
340 |
|
銅片腐蝕（T2.100℃.24h） Copper corrosion（T2.100℃.24h） |
合格PASS |
|
水淋流失量（79℃，1h）% Sprinkling loss（79℃，1h）% |
1.1 |
|
鋼網分油（100℃，24h）% Steel mesh oil filtering（100℃，24h）% |
1.2 |
|
防腐蝕性（52℃，48h） Corrosion resistance（52℃，48h） |
合格 PASS |
|
極壓性能（四球機法）Pa/kg Extreme pressure performance (4-ball test)Pa/kg |
580 |
|
蒸發度（120℃，m/m）% Evaporativity（120℃，m/m）% |
≤1 |
|
EMCOR防銹實驗，10%合成海水 EMCOR antirust experiment, 10% synthetic sea water |
0.0（無銹） (No rust) |
|
適用工作溫度℃ Applicable working temperature ℃ |
-40--+200 |